qmi.instruments.jpe.cpsc.JPE\_CPSC
==================================

.. currentmodule:: qmi.instruments.jpe.cpsc
   :members:
   :no-imported-members:

.. autoclass:: JPE_CPSC
   :members:
   :show-inheritance:
   :inherited-members:

   
   .. automethod:: __init__

   
   .. rubric:: Methods

   .. autosummary::
   
      ~JPE_CPSC.__init__
      ~JPE_CPSC.auto_oem_calibration
      ~JPE_CPSC.close
      ~JPE_CPSC.disable_servodrive
      ~JPE_CPSC.emergency_stop
      ~JPE_CPSC.enable_scan_mode
      ~JPE_CPSC.enable_servodrive
      ~JPE_CPSC.force_unlock
      ~JPE_CPSC.get_category
      ~JPE_CPSC.get_current_counter_value
      ~JPE_CPSC.get_current_encoder_signal_value
      ~JPE_CPSC.get_current_position
      ~JPE_CPSC.get_current_position_of_all_3_channels
      ~JPE_CPSC.get_idn
      ~JPE_CPSC.get_info_all_modules
      ~JPE_CPSC.get_info_module
      ~JPE_CPSC.get_name
      ~JPE_CPSC.get_signals
      ~JPE_CPSC.get_status_position_control
      ~JPE_CPSC.is_locked
      ~JPE_CPSC.is_open
      ~JPE_CPSC.lock
      ~JPE_CPSC.move
      ~JPE_CPSC.move_to_setpoint
      ~JPE_CPSC.open
      ~JPE_CPSC.read_excitation_duty_cycle
      ~JPE_CPSC.read_negative_end_stop
      ~JPE_CPSC.read_positive_end_stop
      ~JPE_CPSC.release_rpc_object
      ~JPE_CPSC.request_calibration_values
      ~JPE_CPSC.request_fail_safe_state
      ~JPE_CPSC.reset_counter_value
      ~JPE_CPSC.reset_end_stops
      ~JPE_CPSC.save_detector_settings
      ~JPE_CPSC.save_rsm_settings
      ~JPE_CPSC.set_detector_gain
      ~JPE_CPSC.set_excitation_duty_cycle
      ~JPE_CPSC.set_lower_threshold
      ~JPE_CPSC.set_negative_end_stop
      ~JPE_CPSC.set_positive_end_stop
      ~JPE_CPSC.set_upper_threshold
      ~JPE_CPSC.stop
      ~JPE_CPSC.unlock
      ~JPE_CPSC.use_external_input
   
   

   
   
   .. rubric:: Attributes

   .. autosummary::
   
      ~JPE_CPSC.CPSC_CMD
      ~JPE_CPSC.DEFAULT_CPSC_DIR
      ~JPE_CPSC.USB_ID