qmi.instruments.parallax.usb\_propeller.Parallax\_UsbPropeller
==============================================================

.. currentmodule:: qmi.instruments.parallax.usb_propeller
   :members:
   :no-imported-members:

.. autoclass:: Parallax_UsbPropeller
   :members:
   :show-inheritance:
   :inherited-members:

   
   .. automethod:: __init__

   
   .. rubric:: Methods

   .. autosummary::
   
      ~Parallax_UsbPropeller.__init__
      ~Parallax_UsbPropeller.clear
      ~Parallax_UsbPropeller.close
      ~Parallax_UsbPropeller.disable_servo_channel
      ~Parallax_UsbPropeller.enable_servo_channel
      ~Parallax_UsbPropeller.force_unlock
      ~Parallax_UsbPropeller.get_category
      ~Parallax_UsbPropeller.get_idn
      ~Parallax_UsbPropeller.get_name
      ~Parallax_UsbPropeller.get_signals
      ~Parallax_UsbPropeller.get_speed
      ~Parallax_UsbPropeller.get_target_values
      ~Parallax_UsbPropeller.get_value
      ~Parallax_UsbPropeller.is_locked
      ~Parallax_UsbPropeller.is_moving
      ~Parallax_UsbPropeller.is_open
      ~Parallax_UsbPropeller.lock
      ~Parallax_UsbPropeller.move_down
      ~Parallax_UsbPropeller.move_up
      ~Parallax_UsbPropeller.open
      ~Parallax_UsbPropeller.release_rpc_object
      ~Parallax_UsbPropeller.set_baud_rate
      ~Parallax_UsbPropeller.set_default_move
      ~Parallax_UsbPropeller.set_max
      ~Parallax_UsbPropeller.set_min
      ~Parallax_UsbPropeller.set_software_port_range
      ~Parallax_UsbPropeller.set_speed
      ~Parallax_UsbPropeller.set_startup_servo_mode
      ~Parallax_UsbPropeller.set_target_value
      ~Parallax_UsbPropeller.unlock
   
   

   
   
   .. rubric:: Attributes

   .. autosummary::
   
      ~Parallax_UsbPropeller.AVAILABLE_CHANNELS
      ~Parallax_UsbPropeller.DEFAULT_BAUDRATE
      ~Parallax_UsbPropeller.DEFAULT_MAX
      ~Parallax_UsbPropeller.DEFAULT_MIN
      ~Parallax_UsbPropeller.MAX_PULSE_WIDTH
      ~Parallax_UsbPropeller.MAX_SPEED
      ~Parallax_UsbPropeller.RESPONSE_TIMEOUT